Frequently Asked Question!
Do Not Mix Chemicals With Bare Hands. Read Instructions On Each Product. Contact Us When You Have Something On Your Mind. Find Out Time To Use The Product. Wear Your Occupational Safety Equipment.
The product suitable for the joint width should be selected, the joints should be well moistened with water, the amount of water should be adjusted well, the application should not be made under direct sunlight and high temperature, The surface should be protected from wind (air flow) after the application.
Material exposed to moisture should not be used, The amount of water should be adjusted as it is written on the package label information, Powder should be added to the water, The mixture should be made with a mixer.
Absorbent floor should be moistened or primed, application should not be made in high temperature environment, the surface should be protected from wind (air flow), products whose shelf life has expired should not be used, and an adhesive suitable for the coating material, the environment to be applied and the surface should be selected.
Grouting should be mixed with clean water, the amount of water should be adjusted well, wiping should be done when the surface becomes dull, wiping should be done with a well-pressed clean sponge, the joints should be filled evenly, the final cleaning should be done after the joints are completely dry.
Drying and cure times for liquid applied waterproofing membranes are dependent on ambient relative humidity, ambient temperature, porosity of substrates, air flow and substrate temperature. Most membrane manufacturers specify minimum cure times. These average from 24 to 72 hours.